果园喷雾机的设计毕业论文

 2021-04-07 06:04

摘 要

基于我国的果园的现状以及在果园喷洒中出现的问题,本文阐释了研究风送式果园喷雾机的重要性及研究的目的,认为大力研究和发展新式的风送式果园喷雾机能够大大提高喷洒效率以及解放生产力,具有很大的市场效益。并在此基础上分析了国内外同类的研究现状,借鉴了国内外已有的研究成果,知道了我们未来设计过程需要突破和创新的方面,并在这些方面做了一些简单实效的展望。

本篇论文在大量的实践和导师的指导下,提出了一种以小四轮拖拉机为动力源,适合大面积果园喷洒的风送式果园喷雾机。它把传统的轴流式环形喷头弥雾方式改进为立体喷架实现喷雾,比传统果园喷雾机对果树冠层喷雾更加均匀。利用风送喷雾技术不仅有效减少了机组前进过程中产生的雾滴飘移现象,同时使雾滴二次雾化,使雾滴更具有穿透性。具体的研究方向如下:通过拖拉机的无后动力输出轴,在方案比较的情况下,设计了三点悬挂式机架结构。同时为了适应果园株行距的不同,设计了宽度可调式立体喷架。整机主要由药箱、液泵、流量控制阀、喷雾液流系统、轴流式风机、立管风筒、可调喷架和传动装置组成。通过理论计算完成各个部件的选型,主要包括药箱、液泵、喷头、风机等。然后通过CAD等软件将整体结构直观地表达出来,这样可以更好地优化自己的设计,节约成本。

关键词:风送式喷雾机;设计;喷雾效果

Design on Air-Orchard sprayer

Abstract

Based on the status of the orchard and the emergence of problems in the orchard spraying, the paper explains the purpose of research Air - Orchard sprayer and the importance of research, that the vigorous research and development of new Air - Orchard sprayer can greatly improve spray efficiency and liberate the productive forces, has great market efficiency. And on the basis of analysis of the research status at home and abroad similar, we draw existing research results at home and abroad, we known aspects of our future design process requires breakthroughs and innovation, and prospected some simple effectiveness in these areas.

This thesis under the guidance of a lot of practice and mentors, I propose a small four-wheel tractor as the power source for large-scale orchard spraying breeze orchard sprayer. It is the traditional axial ring nozzle mist spray to implement ways to improve spray rack perspective than the traditional orchard sprayer more uniform spray on fruit trees canopy. Use of wind sent spray technology not only effectively reduce the process forward unit produced the phenomenon of spray drift, while the second droplet , droplet makes more penetrating. Specific research directions are as follows: By no later PTO tractor, in the case of comparable programs designed three-point suspension rack structure. Meanwhile, in order to adapt to different orchard spacing, design width adjustable spray rack perspective. The main machine from the medicine chest, pump, flow control valves, flow spray systems, axial fans, duct risers, adjustable spray rack and gear components. The theoretical calculations are complete selection of various parts, including kits, pumps, nozzles, blower and the like. Then CAD and other software will visually express the overall structure, so you can better optimize their designs and cost savings.

Key words: Air-assisted;Spray effect;design.

目 录

1引言 5

1.1课题的研究背景和意义 5

1.2国内外研究现状和发展方向 5

1.2.1国内外研究现状 5

1.2.2国内外发展方向 7

1.3研究内容与技术路线 9

1.3.1主要研究内容 9

1 3.2技术路线 9

2果园风送式果园喷雾机的设计 10

2.1整机方案的确定及工作原理 10

2.2主要技术参数 12

2.3关键零部件的选型和设计 12

2.3.1主机架的设计 12

2.3.2喷雾系统 13

2.3.3喷头的选择 14

2 3.4液泵的选择 14

2.3.5药液箱容积的计算 15

2.3.6风机参数的确定和选型 17

2.3.7传动系统设计 20

2.3.8主从动带轮直径计算和皮带的选型 21

3总体结论 23

致谢 24

参考文献 25

1引言

1.1课题的研究背景和意义

我国人口众多,是水果生产和需求大国,但是水果的农药残留问题和果树病虫害防治过程中农药过量使用问题越发严峻[1]。目前,我国果园植保作业主要有以下几种方式:一是手动背负式喷雾,劳动强度大,作业条件也差,而且喷出的雾滴颗粒大,不均匀,增大了药物残留。二是机动背负式喷雾,雾化效果比较好,但需要时刻增加药液,所以作业效率低。随着我国经济的发展和农业产业结构的调整,林果种植面积逐年增大。并且果园作业中施药是最费时费工的一项作业,大约占到果园总工作量的30%,施药质量对水果品质和产量均有直接影响,然而我国的喷雾机械技术仍处于机械化和自动化程度较低的发展阶段[2]。因此发展大型的,先进的果园风送式喷雾机是我国农林业机械化发展的必经阶段,它可以大面积作业,解决以上所说的费时费力的弊端,同时大大解放生产力,提高生产效率。

目前市场上出现的喷雾机多以自动化程度低的手动踏板式喷雾机,背负式喷雾喷粉机,担架式喷雾机为主,其中手动喷雾机占80%的市场份额,但其具有压力低,射程短,喷洒效果不明显的弊端。然而果园风送式喷雾机它不是仅靠液泵的压力使药液雾化,而是依靠风机产生强大的气流将雾滴吹送至果树的各个部位。风机的高速气流有助于雾滴穿透茂密的果树枝叶,井促使叶片翻动,提高了药液附着率且不会损伤果树的枝条或损坏果实[3]。并且,果农在闷热、密闭、潮湿的环境中进行施药作业,易发生中毒事件。因此,研究风送式果园喷雾机既能够填补现在的市场空缺,具有巨大的市场效益,而且还能有效减少事故的发生,大大提升果农的人生安全。

1.2国内外研究现状和发展方向

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。