小型玉米收割机的设计毕业论文

 2021-04-07 06:04

摘 要

小型多功能玉米割灌机主要用在农业、林业和园林作业。我国种植玉米的历史很悠久,种植面积很广大,产量也很丰富。玉米是食品工业、饲料工业、医药工业的主要原料,是我国种植业三大主产作物(稻谷、小麦、玉米)之一。我国的主要产区是:东北、华北、西北;主要省份有:吉林、黑龙江、山东、河南、河北。玉米生产在国民经济发展中起着重要作用。[1]根据农作物的生长规律,平均每年都需要一到两次收割,而平时若手动收割,则劳动强度大且生产效率低,因此,为了提高生产效率,小型玉米收割机必不可少。而本次设计的小型玉米收割机就是收割机中一种简便、快捷的机具。

多功能小型收割机收割干净,铺放整齐,可条铺或堆放。适应平原、丘陵、梯田、三角地等大小田块及烂泥田。可用于收割小麦、水稻、玉米、青稞、麻类、棉花、豆类等农作物。换上相应的刀具,装上上下托板和安全的防护罩,还可以收割灌木、牧草、芦苇及茶园枝头修剪和花圃的休整操作简单,维修方便。长期在恶劣的噪声环境中工作会导致职业性耳聋,并且在4KHz附近容易产生听力损伤,这是职业性耳聋的特点,所以收割机工作是应尽量防止噪声过大,并使用消音器;要尽量减小收割机把手的振动;[2]工作部分采用圆锯片做为切割部件;除此之外,动力装置应符合国标要求。

关键词:收割机;小型;简单快捷;生产效率

The design of small corn harvester

ABSTRACT

Small multi-function corn cutting machine is mainly used in agriculture, forestry and gardening. The history of our country maize is very long, planting area is very broad, production is also very rich. Corn is the food industry, feed industry, the pharmaceutical industry the main raw material, is our country farming three agriculture is one of the crops (rice, wheat, corn). Our main production is: northeast, north China, northwest; Main provinces: jilin, heilongjiang, shandong, henan, hebei. Corn production plays an important role in national economic development. According to the crop growth rule, need one or two times a year on average, harvest and if manual harvest, the labor intensity and low production efficiency, therefore, in order to improve the production efficiency, small corn harvester is indispensable. And the design of small corn harvester is an easy and fast machine harvester.

Multifunctional clean small harvesters, lay out neatly, can be a shop or stack. To adapt to the plains and hills, terraces, such as triangle size field and the mud field. Can be used to harvest the wheat, rice, corn, barley, hemp, cotton, beans and other crops. Change into the corresponding tool, mount plate up and down and safe guard, also can harvest branch pruning bushes, grass, reeds and tea garden and flower beds recuperation of simple operation, easy maintenance. In a terrible noise environment for a long time can cause occupational deafness, and near the 4 KHZ prone to hearing loss, which is the characteristic of occupational deafness, so combine work is should try to prevent too much noise, and use the silencer; To reduce the vibration of the harvester handle as far as possible; Working part adopts circular saw blade for cutting parts; In addition, the power plant should comply with the national standard requirements.

Key words:harvester; Small; Simple and quick; The production efficiency

目 录

1绪论 2

1.1引言 2

1.2国外玉米收割机发展概况 2

1.3 国内玉米收割机发展概况 4

1.4 本文研究的目的及意义 6

2 小型玉米收割机的设计方案 8

2.1 小型玉米收割机的比较和选择 8

2.2 小型玉米收割机的组成及工作原理 9

2.2.1 小型玉米收割机的组成 9

2.2.2 小型便携式割灌机的工作原理 9

3 小型便携式割灌机的机构设计 11

3.1 发动机的选择 11

3.2 离合器的设计选择 11

3.3 传动轴的设计 14

3.4 减速器的设计计算 15

3.5 小型便携式割灌机工作头的设计 18

3.6 小型便携式割灌机把手的设计 19

4 总结和展望 21

4.1 总结 21

4.2 展望 21

致 谢 22

参考文献 23

1绪论

1.1引言

玉米是我国的高产农作物之一,它具有喜温和光合效率高等特点。目前我国玉米种植面积有2500万hm2,主要分布在东北、华北、西北和西南地区。由于分布范围广大,每个地方的气候条件也不一样,因此各地的玉米种植方式也不尽相同。目前我国形成了三大玉米种植区,分别为北方玉米区、黄淮平原春夏玉米区、西南丘陵玉米区,这三个区占了全国玉米总种植面积的80%。无论是播种面积还是产量,与小麦相比,玉米都要远远超出。同时,玉米的用途范围极广,浑身是宝。作为粮食,它对人类生存和发展做出了巨大的贡献;作为饲料,它是畜牧业的优质精饲料,有饲料之王的美称;玉米还可以作为工业原料,在许多领域都有它独特的作用。[3]

现阶段,玉米的机械化收获比率与小麦、水稻相比还是比较低的。据农业部2012年公布的数据,截止2012年底,全国实际正在使用的玉米收获机械达到了20万台左右,全国玉米收获机械化率也达到了40%[4]。随着我国经济社会的发展,越来越多的农村青壮年走进城市,农村剩余的青壮劳动力越来越少,留守的老弱病残不能胜任手动玉米收或这种强体力的劳动,很多地区的玉米种植面一直处于下降的趋势。另一方面,由于机械化水平程度低,大量的玉米秸秆只有被焚烧或者废弃,一方面会造成环境污染,需要国家投入大量的人力物力去整治,另一方面也会造成资源的浪费。所以,在今后相当长的一段时期的国民经济发展中,我国要解决粮食自给,逐步改善人民群众的饮食结构,就必须在扩大玉米的种植面积、提高玉米单产的同时大力推行玉米收获机械化。

1.2国外玉米收割机发展概况

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。